West Marine VHF255 Owner's Manual download pdf (Page 22)

Uniden MHS550 Radio Owner’s Manual

Mounting the charger

You can mount the charger on any at surface or on a wall.

Mounting on a at surface

Use the three holes at the base of

the charger as a template to mark the

drill holes.

Using a ⅛ inch (or 3 mm) drill bit, drill

three holes ½ inch (13 mm) deep.

Use the provided screws to attach

the charger to the surface.

Mounting on a wall

Before wall-mounting the charger, be sure the wall material is

strong enough to hold the weight of both the radio and

charger. Use anchors appropriate for the wall material.

Using the holes in the rear of the charger as a

template, mark the location of the drill holes.

Using a ⅛ inch (or 3 mm) drill bit, drill two holes ½ inch

(13 mm) deep. (If you are using anchors, follow the

drilling instructions on the packaging.)

Insert the screws into the holes, leaving ⅛ inch (3 mm)

of space between the wall and the screw head.

Place the holes on the charger over the screw heads.

Slide the charger down to lock it into place.

Use the charger

as a template to

mark drill holes.

Use the charger

as a template to

mark drill holes.

Place the charger

over the screw

heads and push it

down into place.

Place the charger

over the screw

heads and push it

down into place.

Insert the screws

(be sure to use a

proper anchor).

Insert the screws

(be sure to use a

proper anchor).

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 55 56

Comments to this Manuals

No comments

West Marine VHF255 Owner's Manual Page 22

Comments to this Manuals

Related products and manuals for Two-way radios West Marine VHF255